LINEAR SHAFTING (METRIC & INCH)

 

Linear Shafts

Examples of Induction Hardened Shafts with machined ends

   

Materials:

CF53 Steel, Induction Hardened.

 

CF53 Steel Hard Chrome Plated, Induction Hardened.

 

X90 Stainless Steel, Induction Hardened.

 

X46 Stainless Steel, Induction Hardened.

 

Hollow Steel 100 CR6, Induction Hardened.

   

Finish:

Precision Ground & polished to 8-12 Micro Inches Ra.

   

Associated Products:

Non Linear general engineering specifications.

 

Ball Screws.

 

Aluminium Shaft supports & End supports.

 

Linear Guideways.

 

Linear Ball Bushings.

   

When ordering:

Please state: Material + O.D + Length + any machining required

   

All data is correct to the best of our knowledge, however Headland cannot be held responsible for any errors or omissions.

 

Nominal Diameter

Tolerance

Tolerance

Roundness

Minimum

Random Lengths

O.D.

mm

inch

inch

Hardness

 

mm

inch

h6

h7

L

S

L

S

mm

inch

mm

feet

5

 

0 / -0.008

0 / -0.012

       

1.0

 

6000

 

6

 

0 / -0.008

0 / -0.012

       

1.0

 

6000

 
 

1/4

   

.2495

.2490

.2490

.2485

0.00015

0.0003

 

0.45

 

20.0

8

 

0 / -0.009

0 / -0.015

       

1.0

 

6000

 
 

3/8

   

.3745

.3740

.3740

.3735

0.00015

0.0003

 

0.045

 

20.0

10

 

0 / -0.009

0 / -0.015

       

1.0

 

6000

 

12

 

0 / -0.011

0 / -0.018

       

1.0

 

6000

 
 

1/2

   

.4995

.4990

.4990

.4985

0.00025

0.0003

 

0.06

 

20.0

14

 

0 / -0.011

0 / -0.018

       

1.0

 

6000

 
 

5/8

   

.6245

.6240

.6240

.6235

0.00025

0.0003

 

0.06

 

20.0

16

 

0 / -0.011

0 / -0.018

       

1.0

 

6000

 
 

3/4

   

.7495

.7490

.7490

.7485

0.00025

0.0003

 

0.09

 

20.0

20

 

0 / -0.013

0 / -0.021

       

1.8

 

6000

 

25

 

0 / -0.013

0 / -0.021

       

1.8

 

6000

 
 

1

   

.9995

.9990

.9990

.9985

0.00025

0.0003

 

0.09

 

20.0

30

 

0 / -0.013

0 / -0.021

       

2.0

 

6000

 
 

1 1/4

   

1.2495

1.2490

1.2490

1.2485

0.00025

0.0003

 

0.110

 

20.0

 

1 1/2

   

1.4494

1.4989

1.4989

1.4984

0.00025

0.0003

 

0.110

 

20.0

40

 

0 / -0.016

0 / -0.025

       

2.5

 

6000

 

50

 

0 / -0.016

0 / -0.025

       

2.5

 

6000

 
 

2

   

1.9994

1.9987

1.9987

1.9980

0.00025

0.0003

 

0.11

 

20.0

60

 

0 / -0.019

0 / -0.030

       

3.0

 

6000

 
 

2 1/2

   

2.4993

2.4985

2.4985

2.4977

0.00032

0.0004

 

0.11

 

20.0

70

 

0 / -0.019

0 / -0.030

       

3.0

 

6000

 

80

 

0 / -0.019

0 / -0.030

       

3.0

 

6000

 

100

 

0 / -0.022

0 / -0.035

       

3.3

 

6000